6
Advanced Copying
6-12
Setting the Erase Function
1
Position the original.
❍
Original Loading (p.4-1)
2
Press the [ERASE] key to light the
desired erase position indicator.
?
Do you know how to set the
erase width for each erase func-
tion?
➜
The Left, Upper, and Frame
erase width can be set in the
range between 5 mm and 20
mm, variable in 1-mm incre-
ments. The default value is 10
mm.
➜
Only 10 mm is available for the
Center erase width.
➜
To change the erase width, change the setting for “Erase Setting”
of User’s Choice. (p.7-8)
3
Make any other necessary settings.
4
Enter the number of copies to be made from the Key Pad and then
press the [START] key.
Konica7115_7118.book Page 12 Tuesday, October 16, 2001 10:51 AM
To Next Page
Loading...
