4 Options
4.1 PF-707
4.1.1 Multi-feed of Plain Fine paper under high temperature and high humidity
--------------------- 194
4.1.2 PF-707 Wrinkle on paper ----------------------------------------------------------------------------------- 195
4.1.3 PF-707 Paper skew of small size ------------------------------------------------------------------------- 197
4.1.4 PF-707 Corner fold (dog ear) and conveyance JAM of small size -------------------------------- 200
4.1.5 PF-707m(A55CWY2) Thick paper jam due to multi-feed ------------------------------------------- 202
4.2 LU-202XL
4.2.1 No feed JAM/ Paper skew when feeding a western style envelop
--------------------------------- 203
4.2.2 LU-202m/LU-202XL J-1501(No feed Jam) occurs when the thick paper and the coated paper
is fed ---------------------------------------------------------------------------------------------------------------------- 205
4.2.3 LU-202m/LU-202XL J-1502(No feed JAM) occur when feeding coated paper ----------------- 206
4.2.4 LU-202XL Black Line at 104mm, 208mm from leading edge 614mm from trailing edge or
narrow trailing space (magnification defect) -------------------------------------------------------------------- 207
4.3 OT-510
4.3.1 J-7229 The paper trailing edge does not go out the paper exit section
--------------------------- 208
4.4 FS-532
4.4.1 Irregular correspondence of the main tray exit
-------------------------------------------------------- 209
4.5 IQ-501
4.5.1 Connecting Q-501, C-6A01 occur
------------------------------------------------------------------------ 216
4.5.2 Connectting IQ-501 and MK-744C (Roatating light), occur C-E002/E013 ---------------------- 217
4.6 DF-706
4.6.1 DF-706 Apper [ADF Clean]
--------------------------------------------------------------------------------- 218
To Next Page
Loading...
Need help?
General
