Konica Minolta bizhub 160 User Guide

3
Getting ready
3-14 SU-502
Getting ready Chapter 3
Specifying the DNS configuration
1 From the network setting menu in the
utility mode, press the [4] key on the
10-key pad to select DNS CONFIG..
2 Press the * and ) keys to select
DISABLE or ENABLE, and then
press the [Yes] key.
–If DISABLE is selected, the net-
work setting screen appears.
–If ENABLE is selected, the screen for entering the IP address of the
DNS server appears. (Go to step 3.)
3 Using the 10-key pad, enter the IP
address for the DNS server.
4 Press the [Yes] key.
The network setting screen appears. To register settings in the ma-
chine, the machine must be turned off, then on again.
5 While the network setting screen is displayed, press the [No/C] key or
[Panel Reset] key so that the message PLEASE RE-START POWER
SUPPLY OFF/ON appears.
6 Set the power switch for the machine to “o”, then “n” to restart the ma-
chine.

Konica Minolta bizhub 160 Specifications

General

Brand	Konica Minolta
Model	bizhub 160
Category	All in One Printer
Language	English