User's Guide
- 139 -
• Cancel the print job.
• Install additional printer memory.
Defective flash memory [51]
Try one or more of the following:
• Replace the defective flash memory card.
• From the printer control panel, press
to ignore the message and continue printing.
• Cancel the current print job.
Flash memory full [52]
Try one or more of the following:
• From the printer control panel, press
to clear the message and continue printing.
• Delete fonts, macros, and other data stored in the flash memory. From the printer control panel,
navigate to:
>Settings > >Print Settings > >Utilities Menu > >Format Flash >
>Yes >
• Use a larger-capacity flash memory card.
Note: Downloaded fonts and macros that are not stored in the flash memory are deleted when the
printer is powered off or restarted.
Flash memory unformatted [53]
Try one or more of the following:
• From the printer control panel, press
to stop the defragmentation and continue printing.
• Format the flash memory device.
Note: If the error message remains, then the flash memory device may be defective and need to be
replaced.
Load MP feeder with [custom type name] [orientation]
Try one or more of the following:
• Load the feeder with the correct size and type of paper.
To Next Page
Loading...
