Konica Minolta bizhub 3301P - Characters Have Jagged or Uneven Edges

User's Guide
- 184 -
Characters have jagged or uneven edges
Action
Yes
No
Step 1
1. Print a font sample list to check if the fonts you are using are supported by
the printer.
a. From the printer control panel, navigate to:
>Reports > >Print Fonts >
b. Press the arrow buttons until PCL Fonts or PostScript Fonts
appears, and then press .
2. Use a font that is supported by the printer or install the font that you want to
use. For more information, contact your system support person.
3. Resend the print job.
Do prints still contain characters that have jagged or uneven edges?
Go to step 2.
The problem
is solved.
Step 2
1. Use a font that is supported by the printer or install the font that you want to
use in your computer. For more information, contact your system support
person.
2. Resend the print job.
Do prints still contain characters that have jagged or uneven edges?
Contact
technical
support.
The problem
is solved.