Konica Minolta bizhub 3301P - Ipv6 Menu

User's Guide
- 88 -
IPv6 menu
To access the menu, navigate to any of the following:
• Network/Ports >Standard Network >Standard Network Setup >IPv6
• Network/Ports >Network [x] >Network [x] Setup >IPv6
Note: This menu is available only in network printers or printers connected to print servers.
Use
To
Enable IPv6
On
Off
Enable Internet Protocol Version Six (IPv6) in the printer.
IPv6 uses bigger numbers to create IP addresses.
Note: On is the factory default setting.
Auto Configuration
On
Off
Specify whether or not the network adapter accepts the automatic
IPv6 address configuration entries provided by a router.
Note: On is the factory default setting.
Set Hostname
Set the host name.
Note: The host name is limited to 15 characters, and accepts US-
ASCII, alphanumeric characters and hyphen only.
View Address
View the current IPv6 addresses.
View Router Address
View the current router address.
Enable DHCPv6
On
Off
Enable DHCPv6 in the printer.
Note: On is the factory default setting.