User's Guide
- 14 -
Selecting a location for the printer
When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan
to install any hardware options, then leave enough room for them also. It is important to:
• Set up the printer near a properly grounded and easily accessible electrical outlet.
• Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN
Technical Committee 156 standard.
• Provide a flat, sturdy, and stable surface.
• Keep the printer:
- Clean, dry, and free of dust.
- Away from stray staples and paper clips.
- Away from the direct airflow of air conditioners, heaters, or ventilators.
- Free from direct sunlight and humidity extremes.
• Observe the recommended temperatures and avoid fluctuations.
15.6 to 32.2°C (60 to 90°F)
-20 to 40°C (-4 to 104°F)
• Allow the following recommended amount of space around the printer for proper ventilation:
To Next Page
Loading...
