To Next Page

To Previous Page

Application Functions

8-46 C450

Application Functions Chapter 8

To copy using the “Neg-/Pos. Reverse” function

1 Position the document to be copied.

– For details on positioning the document, refer to “Feeding the Doc-

ument” on page 3-8.

2 Touch [Application], and then touch [Edit Color].

– To cancel all settings for the Application functions, touch [Reset].

The Edit Color screen appears.

3 Touch [Neg-/Pos. Reverse].

How is the “Neg-/Pos. Reverse” function canceled?

% Touch [Neg-/Pos. Reverse] again.

4 If necessary, specify any other copy settings.

5 Using the keypad, type in the desired number of copies.

6 Press the [Start] key.

Energy Star2
- What Is an ENERGY STAR ® Product2
Trademarks and Registered Trademarks3
- Table of Contents6
Available Features19
- Selecting the Print Color19
- Automatically Selecting the Paper19
- Adjusting Copies to the Size of the Paper19
- Specifying Separate Horizontal and Vertical Zoom Ratios19
- Scanning the Document in Separate Batches19
- Center Binding20
- Sorting Copies20
- Stapling Copies20
- Punching Holes in Copies20
- Copying Multiple Document Pages Onto a Single Page21
- Adjusting Copies According to the Image Quality of the Original21
- Inserting Paper between Copies of Overhead Projector Transparencies21
- Adding a Cover Page22
- Inserting Different Paper into Copies22
- Inserting Pages from a Different Document at Specified22
- Printing Double-Sided Copies with the Specified Page on the Front Side23
- Copying with Reversed Colors23
- Copying with a Background Color24
- Improving the Copy Color Quality24
- Creating Booklets from Copies of Pamphlets24
- Repeating Copy Images25
- Printing the Enlarged Image on Multiple Pages25
- Making Copies for Filing25
- Copying with the Page Layout of a Magazine26
- Erasing Sections of Copies26
- Adjusting the Image to Fit the Paper Size26
- Printing Distribution Text on Copies27
- Programming Copy Settings27
- Checking the Copy Settings27
- Enlarging the Size of Text in Touch Panel Screens27
- Displaying Explanations of Functions and Settings27
- Interrupting a Copy Job28
- Printing a Sample Copy28
Adjust Color Parameters29
General Information about Color31
Relationship between Hue, Brightness and Saturation (Color Model32
- Red" Parameter33
- Green" Parameter34
- Blue" Parameter35
- Color Balance" Parameter (CMYK Color Adjustment36
- Brightness" Parameter38
- Contrast" Parameter39
- Saturation" Parameter40
- Sharpness" Parameter41
- Hue" Parameter42
- Copy Density" Parameter43
- Single Color" Function44
- Color" Function45
- Background Color" Function46
- Neg-/Pos. Reverse" Function47
Explanation of Manual Conventions49
Descriptions and Symbols for Documents and Paper50
- Width" and "Length50
  - Paper Orientation50
User's Guides52
- User's Guide [Copy Operations] <This Manual52
- User's Guide [Network Scanner Operations52
- User's Guide [Box Operations52
- User's Guide [Enlarge Display Operations52
- User's Guide [FK-502 Facsimile Operations52
- User's Guide [Network Facsimile Operations52
- User's Guide [Print Operations]53
- Quick Guide [Print Operations53
  - Legal Restrictions on Copying54
1 Installation and Operation Precautions56
- Safety Information57
  - Warning and Precaution Symbols57
  - Meaning of Symbols57
- Regulation Notices64
- Caution Notations and Labels67
- Space Requirements68
- Operation Precautions69
2 Before Making Copies70
- Part Names and Their Functions71
- Adjusting the Angle of the Control Panel93
  - To Adjust the Angle of the Control Panel93
- Turning on the Main Power and the Auxiliary Power95
- Loading Paper into the 1St Drawer115
  - To Load Paper (1St Drawer)115
- Loading Paper into the 2Nd, 3Rd or 4Th Drawer120
  - To Load Paper (2Nd, 3Rd or 4Th Drawer)120
- Loading Paper into the LCT123
  - To Load Paper (LCT)123
- Loading Paper into the Bypass Tray126
  - To Load Paper (Bypass Tray)126
3 Basic Copy Operations132
- General Copy Operation133
  - To Make a Copy133
- Operations that Cannot be Combined136
  - Operations Where the Setting Specified Last Is Given Priority136
  - Operations Where the Setting Specified First Is Given Priority138
- Feeding the Document139
- Specifying Original Settings152
- Copying Documents of Mixed Sizes ("Mixed Original" Setting)152
- Copying Thick Documents ("Thick Original" Setting)154
- Selecting a Color Setting165
  - To Select a Color Setting166
- Selecting a Paper Setting168
  - Automatically Selecting the Paper Size ("Auto Paper Select" Setting)168
  - Manually Selecting the Desired Paper Size170
- Specifying a Zoom Setting171
- Selecting the Document and Copy Type Settings (1-Side/2-Sides Settings)182
  - To Select Single-Sided Copies184
  - To Select Double-Sided Copies186
- Selecting the Quality of the Document188
  - Loading Documents with Small Print or Photos (Orig. Image Type Settings)188
  - To Specify an Original Type Setting189
- Specifying the Density Settings192
- Selecting a Combine Originals Setting198
  - Copying Multiple Document Pages Onto a Single Page (Combine Originals)200
- Selecting Finishing Settings201
- Separating Copies by Sets ("Sort" Setting)204
- Separating Copies by Pages ("Group" Setting)205
4 Additional Copy Operations220
- Checking the Copy Settings (Mode Check)221
  - To Check the Settings221
  - To Change the Settings223
- Printing a Proof Copy to be Checked (Proof Copy)224
  - To Make Test Prints224
- Interrupting a Copy Job (Interrupt Mode)227
  - To Interrupt a Copy Job227
- Registering Copy Programs (Mode Memory)229
  - To Store a Copy Program229
  - To Delete a Copy Program232
- Copying with Programmed Copy Settings (Mode Memory)233
  - To Recall a Stored Job233
- Displaying Function Descriptions (Help)236
- Specifying Control Panel Settings (Accessibility Mode)242
5 Troubleshooting258
- When the Message "Malfunction Detected." Appears (Call Technical Representative)259
  - To Call the Technical Representative260
- When the Message "Misfeed Detected." Appears262
- When the Message "Replenish Paper." Appears298
  - To Replenish Paper298
- When the Message299
  - Memory Becomes Full While Scanning299
  - Memory Becomes Full While Queuing a Job300
- When "Please Replace Following Unit(S)." Appears301
- When the Message "Please Replace XXXX." Appears302
- Simple Troubleshooting304
- Main Messages and Their Remedies308
6 Specifications312
- Specifications312
7 Copy Paper/Original Documents322
- Copy Paper323
- Selecting the Paper Settings330
- Original Documents347
8 Application Functions352
- Inserting Paper between Overhead Projector Transparencies ("OHP Interleave" Function)353
- To Copy Using the "OHP Interleave" Function354
- Adding Cover Pages ("Cover Mode" Function)356
- To Copy Using the "Cover Mode" Function357
- Inserting Different Paper into Copies ("Insert Sheet" Function)359
- To Copy Using the "Insert Sheet" Function360
- Inserting Copies of a Different Document for a Specified Page ("Insert Image" Function)363
- To Copy Using the "Insert Image" Function363
- Specifying Pages to be Printed on the Front Side ("Chapters" Function)367
- To Copy Using the "Chapters" Function368
- Scanning Documents with Different Settings and Printing Copies All Together ("Program Job" Function)370
- To Copy Using the "Program Job" Function370
- Producing Separate Copies of each Page in a Page Spread ("Book Copy" Function)375
- To Copy Using the "Book Copy" Function376
- Copying Pamphlets ("Booklet Original" Function)380
- To Copy Using the "Booklet Original" Function381
- Tiling Copy Images ("Image Repeat" Function)384
- To Copy Using the "Image Repeat" Function385
- Copying an Enlarged Image on Multiple Pages ("Poster Mode" Function)389
- To Copy Using the "Poster Mode" Function389
- Copying with the Page Layout of a Magazine ("Booklet" Function)394
- To Copy Using the "Booklet" Function395
- Copying with Image Colors Inversed ("Neg-/Pos. Reverse" Function)396
- To Copy Using the "Neg-/Pos. Reverse" Function397
- Copying in a Mirror Image ("Mirror Image" Function)398
- To Copy Using the "Mirror Image" Function398
- Adding a Background Color to Copies ("Background Color" Function)402
- To Copy Using the "Background Color" Function402
- Adjusting the Copy Color Quality (Adjust Color Parameters)404
  - To Adjust the Adjust Color Parameters405
  - Checking the Print Result of the Adjust Color Settings (Sample Copy)407
  - To Make Sample Copies408
- Adding Filing Margins to Copies ("Page Margin" Function)409
- To Copy Using the "Page Margin" Function410
- Erasing Specified Areas of Copies ("Erase" Function)412
- To Copy Using the "Erase" Function412
- Adjusting the Image to Fit the Paper (Image Adjustment Settings)414
  - To Copy Using the Image Adjustment Settings415
  - Printing the Date/Time, Page Number or Distribution Number on Copies (Stamp Functions)418
  - Printing the Date/Time ("Date/Time" Function)419
  - To Copy Using the "Date/Time" Function419
  - Printing the Page Number ("Page #" Function)422
  - To Copy Using the "Page #" Function422
  - Printing the Distribution Number ("Set Numbering" Function)426
  - To Copy Using the "Set Numbering" Function426
9 Replacing Toner Cartridges and Staples and Emptying Waste Containers428
- Replacing the Toner Cartridge429
  - To Replace the Toner Cartridge431
- Replacing the Staples436
  - To Replace the Staple Cartridge for Finisher FS-507437
  - To Replace the Staple Cartridge for Finisher FS-603441
- Clearing a Staple Jam446
  - To Clear Jammed Staples in Finisher FS-507447
  - To Clear Jammed Staples in Finisher FS-603450
- Emptying the Waste Containers456
  - To Empty the Hole-Punch Waste Container in Finisher FS-507458
  - To Empty the Hole-Punch Waste Container for Finisher FS-603460
- Replacing the Waste Toner Box462
  - To Replace the Waste-Toner Box464
10 Care of the Machine468
- Cleaning469
- Viewing Counters (Meter Count)473
- When the Message "Preventive Maintenance Time." Appears475
11 Managing Jobs (Job List)476
- Overview of the Job List Screen477
- Performing Operations on Jobs481
12 Utility494
- Overview of Utility Mode Parameters495
  - List of Registration Information and Parameters495
- Selecting a Destination Register507
- Specifying User Settings510
- Specifying Administrator Settings519
- Security Setting533
- Security Details534
- Displaying the Administrator Setting Screen538
- Overview of Weekly Timer Settings540
  - Requisite540
- Adjusting the Printer541
- Adjusting the Finisher547
  - Adjusting the Center Stapling Position547
  - Adjusting the Center Folding Position550
- Adjusting the Color Registration553
  - Adjusting the Color Registration for Black553
  - Adjusting the Color Registration for Yellow, Magenta and Cyan556
- Adjusting the Gradation Levels559
  - Requisite559
- 12.10 Authentication Method561
- 12.11 User Authentication Setting569
- 12.12 Account Track Setting581
- 12.13 Password Rules587
  - Conditions of the Password Rules587
- 12.14 Enhanced Security Settings589
  - 12.15 Viewing the Status of the Consumables592
    - Displaying the Unit Life Indicator Screen592
13 Appendix594
- Entering Text595
  - To Type Text597
  - List of Available Characters597
- Glossary598
- Index603

Print Technology	Laser
Print Speed (Color)	45 ppm
Print Speed (Black)	45 ppm
Duplex Printing	Yes
ADF Capacity	100 sheets
Scan Resolution	600 x 600 dpi
Fax	Optional
Max Paper Size	A3
Scanner Type	Flatbed, ADF
Interface	USB, Ethernet
Supported Paper Sizes	A3, A4, A5, B4, B5, Custom
Copy Speed	45 cpm
Operating System Compatibility	Windows, Mac, Linux

Konica Minolta bizhub C450 User Manual

Table of Contents

Other manuals for Konica Minolta bizhub C450

Questions and Answers:

Konica Minolta bizhub C450 Specifications

Related product manuals