2
Before Making Copies
2-18 C450
Before Making Copies Chapter 2
Control Panel
No. Part Name Description
1 [Power Save] key Press to enter Low Power mode. While the machine
is in Low Power mode, the indicator on the [Power
Save] key lights up in green and the touch panel
goes off. To cancel Low Power mode, press the
[Power Save] key again.
2 Touch panel Displays various screens and messages.
Specify the various settings by directly touching the
panel.
3 [Access] key If user authentication or account track settings
have been applied, press this key after entering the
user name and password (for user authentication)
or the account name and password (for account
track) in order to use this machine.
4 [Box] key Press to enter Box mode.
While the machine is in Box mode, the indicator on
the [Box] key lights up in green. For details, refer to
the Box Operations of the C450 User’s Guide.
5 [Fax] key Press to enter Fax mode.
While the machine is in Fax mode, the indicator on
the [Fax] key lights up in green.
For details, refer to the Facsimle Operations and
the Network Facsimile Operations of the C450
User’s Guide.
6 [Scan] key Press to enter Scan mode.
While the machine is in Scan mode, the indicator on
the [Scan] key lights up in green.
For details, refer to the Network Scanner
Operations of the C450 User’s Guide.
Power Save
Box
Access
ABC DEF
JKLGHI MNO
TUVPQRS WXYZ
Mode Memory
Mode Check
Utility/
Counter
Fax
Scan
Copy
Reset
Interrupt
Power
Stop
Proof Cop
Proof Copy
Start
Data
Main Power
Help
Accessibility
Enlarge Display
Contrast
1234 5 6 7
8
9
10
11
12
15141618
17192021
22
23
24
13
To Next Page
Loading...
Need help?
General
