Konica Minolta DiMAGE Scan Dual IV User Manual

51
Manual focus
Click the manual-focus button. The mouse point-
er will change to the manual-focus cursor. To
cancel the function, click the manual-focus but-
ton again.
Click on the area of the image to be used for
focus. The focus meter window will appear.
Adjust the slider using the mouse until the black
and white bars are at their longest extension. The
black bar indicates the change in focus. The
white bar indicates the longest extent of the
black bar and the point of sharpest focus.
Click OK to set the focus. A new prescan will
start and replace the previous image.
The scanner can be focused manually using the focus meter. For best results, select an area
within the image with contrast or detail. The manual focus function cannot focus on a low-con-
trast image such as a cloudless or overcast sky.

Konica Minolta DiMAGE Scan Dual IV Specifications

General

Brand	Konica Minolta
Model	DiMAGE Scan Dual IV
Category	Scanner
Language	English