To select file names. The automatic option names files based on the date and time of the scan;
the file name begins with DS followed sets of two registers to indicate the year, month, day, hour,
minute, and second. DS040523134510 was scanned in 2004 on May 23rd at 1:45pm and 10
seconds. The hour registers are based on a 24-hour clock. The manual option uses the name
entered in the text box plus a four digit serial number which is automatically added.
Click the OK button to complete the operation. For advanced Batch Scan setup, see the follow-
ing page.
77
When the Batch Scan Utility button in the launcher window
is clicked, the scanner will initialize. When the set-holder
message appears, insert the holder into the scanner; all the
frames in the holder will be scanned and saved, and the
holder will be ejected automatically.
To scan another batch, change the film in the holder and
reinsert it into the scanner. Click the Batch Scan Utility but-
ton to begin scanning. The scanner only initializes before the
first holder is scanned.
To select the destination of the scanned images. Click the view button to open the file-destina-
tion dialog box. Use the folder tree to locate the folder in which to save the files. Click the folder
to select it. Click the OK button to complete the operation. The destination will be displayed in
the setting window.
If the Batch Scan Utility is allocated to the Quick Scan button with the drop-down menu at the
bottom of the launcher, the first time the Quick Scan button is pressed the scanner initializes and
then the message to insert the holder is displayed. To scan subsequent holders, simply insert the
holder and press the Quick Scan button.
To Next Page
Loading...
Need help?
General
