Entering Text A-9
Correcting Text and Input Precautions
To erase all entered text, hold down the Back key.
To delete only part of the entered text, use the * and ) keys to move the
cursor (_) to the character that you want to delete, and then press the
Back key.
If multiple characters are assigned to a single key, “OK=)” appears at the
bottom of the screen.
If the same key is to be used to enter two characters in a row, press the )
key after selecting the first character. (Refer to the above inputting exam-
ple.)
To enter a space, press the 0 key.
To Next Page