Configuration Menu Overview2-48
No. of RINGS
Setting
1 to 16 (Default: depends on PTT
SETTING
)
Enter the number of rings (between 1 and 16) until the
machine automatically begins receiving the fax when
an external telephone is connected.
" If PTT SETTING in the USER SETTING
menu is set to NEW ZEALAND, this setting
range changes to 7 to 10.
REDUCTION RX
Setting
OFF / ON / CUT
Select whether documents longer than the current
paper size are printed reduced, split, or discarded.
OFF: The document is printed at full size and split onto
multiple pages.
ON: The document is printed at a reduced size.
CUT: The document is printed, but any part that does
not fit within the page is erased.
RX PRINT
Setting
MEMORY RX / PRINT RX
Select whether the fax is printed only after all docu-
ment pages have been received or printing begins as
soon as the first page of the document is received.
MEMORY RX: Printing begins after all pages have
been received.
PRINT RX: Printing begins after the first page has
been received.
RX MODE
Setting
AUTO RX / MANUAL RX
Select whether the reception mode is set to automatic
reception or manual reception.
AUTO RX: Automatically begins receiving the fax after
the set number of rings.
MANUAL RX: Does not automatically receive the fax.
Reception begins after making a connection by picking
up the telephone receiver or pressing the Onhook key,
then pressing the Start key.
To Next Page