22
4
Open the slide cover and press the [SET] key.
The instrument is now ready for you to enter a value, and
“00.00” will appear (with the decimal point blinking).
z
If the value (integration time or integrated illuminance) had already
been set, it will appear (with the decimal point, “0” or “00” blinking).
z
If an integer value (i.n. a value which does not have a decimal point) has
been set as the reference value, the three decimal points will blink.
5
Select the effective digits of the value using the [
▲
] and [
▼
]
keys.
z
The display will change as follows each time the key is
pressed.
▼
Integrated illuminance
To Next Page
Loading...
