Need help?Do you have a question about the Konica Minolta T-10A and is the answer not in the manual?
General| Brand | Konica Minolta |
|---|---|
| Model | T-10A |
| Category | Measuring Instruments |
| Language | English |
Explains standard safety symbols used in the manual for safe instrument operation.
Outlines critical safety warnings, including fire and electric shock hazards, to prevent serious injury or death.
Provides essential precautions for handling the instrument, batteries, and power cords to avoid hazards.
Guides on how to attach and detach the receptor head from the main body of the meter.
Provides instructions and warnings for installing AA-size batteries into the instrument.
Step-by-step guide on how to perform a standard illuminance measurement using the [NORM] key and HOLD button.
Details how to set the current measured illuminance as the reference value for difference/ratio calculations.
Outlines the process of manually entering a specific reference value for difference/ratio measurements.
Explains how to confirm the set reference value using the [CALL] key after setting it.
Guides on entering a reference value numerically, including digit selection and range adjustments.
Details the steps to finalize the reference value entry and set it for difference/ratio measurements.
Explains how to initiate and view illuminance difference or ratio measurements after setting the reference value.
Explains how to use the CCF function to correct spectral distribution errors during measurement.
Guides on setting the CCF by entering a reference value from a controlled light source.
Details how to enter the reference value and have the CCF calculated and automatically set.
Step-by-step guide on connecting the instrument to a printer and initiating the printing process.
Details the initial steps for setting up multi-point measurement, including attaching adapters and AC adapter.
Guides on connecting multiple receptor heads, their adapters, and extension cables serially.
Explains how to set unique ID numbers for each receptor head using the rotary switch and labeling.
Explains how to power on the instrument and start multi-point measurement, with display of individual or average values.
Provides detailed technical specifications for both T-10A and T-10MA models, including ranges, functions, and performance.
To Next Page