Kontron ETX-DC - Page 59

ETX-DC®/ BIOS Operation
53
External SIO
Feature
Option
Description
External COMA
Disabled
3F8h/IRQ10
3F8h/IRQ11
2F8h/IRQ10
2F8h/IRQ11
3E8h/IRQ10
3E8h/IRQ11
2E8h/IRQ10
2E8h/IRQ11
Selects the base addressand interrupt
request line of the external COM port A.
External COMB
Disabled
3F8h/IRQ10
3F8h/IRQ11
2F8h/IRQ10
2F8h/IRQ11
3E8h/IRQ10
3E8h/IRQ11
2E8h/IRQ10
2E8h/IRQ11
Selects the base addressand interrupt
request line of the external COM port B.
External LPT Address
Disabled
378
279
3BC
Selects the base address of the external
parallel port.
Parallel Port Mode
Normal
Bidirectional
Selects the mode of the external parallel
port.
Parallel Port IRQ
IRQ7
IRQ5
Selects the interrupt request line of the
external parallel port.
Note: There is no floppy interface of the external SuperI/O controller supported, because there is no DMA possible
on ISA bus.