Korg D12 User Manual

64
5 Record the tap tempo.
• Select the “RecStart” button and press the
[ENTER] key to put the D12 in record-ready
mode.
• Press either the [PLAY] key or the foot switch,
and playback and recording will begin simulta-
neously.
• While listening to the playback, press either the
[PLAY] key or the foot switch at the intervals
you selected in step 4, to record the tap tempo.
A counter will be displayed while tempo is
being recorded.
When pressing the [PLAY] key to record taps, do
not strike the key with excessive force. Doing so
may cause the hard disk or other components to
malfunction.
6 Stop recording.
After entering the last tap, press the [STOP] key to
end.
For example if you are recording four measures of
4/4 time, you would tap 4 times for “MeasTap” or
16 times for “BeatTap,” and press the [STOP] key at
the beginning of measure 5.
If you input taps only part-way through the song,
the tempo of the last-input measure or beat will be
automatically copied until the end of the song.
7 Select the tempo track as the tempo source.
• Access the [TEMPO/RHYTHM] “SetUp” tab
page.
• Select “T
empoSource,” and rotate the [VALUE]
dial to select “TempoTrk.”

Korg D12 Specifications

General

Brand	Korg
Model	D12
Category	Recording Equipment
Language	English