Korg D12 User Manual

85
When this is executed (“Exec.”), the copy destina-
tion track will be overwritten.
2. SourceTrack.............................................................
[1...12, 1–2...11–12, 1–4...9–12, 1–6, 7–12, 1–12]
Select the copy source track.
In the case of a 24 bit song, only tracks 1–6 can be
selected.
3. DestTrack.................................................................
[1...12, 1–2...11–12, 1–4...9–12, 1–6, 7–12, 1–12]
Select the copy destination track.
In the case of a 24 bit song, only tracks 1–6 can be
selected.
4. DestVTrack .....................................................[a...h]
Select the virtual track of the copy destination track
(“DestT
rack”) to which the data will be copied.
5. Exec. (Execute).........................................................
Execute the track editing operation.
EditType: “SwapWholeTrack”
This operation exchanges (swaps) the track data from
the beginning to the end of the swap source track
(“Sour
ceTrack”; the currently selected virtual track)
with the specified virtual track of the swap destination
track (“DestT
rack”).
Use this operation when you wish to reorder the
recorded tracks. When you have finished recording a
song, this operation also provides a useful way to move
the final data so that virtual track “a” is used for all
tracks.
When this is executed (“Exec.”), all data of the “Sour
ce-
Track” and “DestTrack” will be exchanged.
2. SourceTrack ............................................................
[1...12, 1–2...11–12, 1–4...9–12, 1–6, 7–12, 1–12]
Select the swap source track.
In the case of a 24 bit song, only tracks 1–6 can be
selected.
3. DestTrack................................................................
[1...12, 1–2...11–12, 1–4...9–12, 1–6, 7–12, 1–12]
Select the swap destination track.
In the case of a 24 bit song, only tracks 1–6 can be
selected.
4. DestVTrack......................................................[a...h]
Select the virtual track of the swap destination track
(“DestT
rack”) to which the data will be swapped.
5. Exec. (Execute) ........................................................
Execute the track editing operation.
EditType: “FadeTrack”
This operation fades-in or fades-out the track data in
the IN–OUT range of the fade-in destination track
(“DestTrack”). When this operation is executed, the
audio data in the IN–OUT range will be smoothly
faded to the level of the OUT time location.
When this is executed (“Exec.”), the fade-in (fade-
out) destination track will be overwritten.
2. DestTrack................................................................
[1...12, 1–2...11–12, 1–4...9–12, 1–6, 7–12, 1–12]
Select the track to be edited.
In the case of a 24 bit song, only tracks 1–6 can be
selected.
3. Exec. (Execute) ........................................................
Execute the track editing operation.
4. Wave .....................................................................
This displays the audio data of the track as a wave-
form.
Here you can set the editing locations (IN, OUT,
TO) more precisely. (→p.81 EditType: “CopyTrack”)
5. Mode .....................................................................
Select the fader curve for the fade-in or fade-out.
1
5
2
3 4
SourceTrack
DestVTrack (a...h)
1
5
2
3 4
SourceTrack
DestVTrack (a...h)
SourceTrack
DestVTrack (a...h)
1 4
3
2
5
IN OUT
IN OUT
Refer
e
TRACK

Korg D12 Specifications

General

Brand	Korg
Model	D12
Category	Recording Equipment
Language	English