Korg DSS-1 - Page 77

2 Procedures for setting attenuation and gain.
Operation
Q Confirm that the SA M P LE mode is selected and
that you have completed the INITIAL opera
tions {detailed in the previous section starting
on page 61).
Operation of DSS-1
• Indicates SA M P LE mode.
SAMpLfc
1 I t ___
On
Press number 2 in the 10-key pad.
I
?
Press
2; Use DATA EN TRY B for gain and DATA EN TRY
A for attenuation setting.
i
• This selects the attenuation/gain function. The
display shows the current values.
Shows the attenuation. Shows the gain.
Shows input | Shows the trigger level (threshold),
signal level.
t
i
\
DATA EN TR Y B
A
T
Use to select Gain
Shows currently selected gain.
b g a
DATA EN TR Y A
b
1
i
Use to select
Attenuation
Shows currently selected attnuation.