Korg DSS-1 - Page 78

SAMPLE MODE
F3 TRIGGER LEVEL
[1 What is trigger level?
■ This is the level or threshold that the input audio
signal must reach before the D S S -1 begins sampling.
Available trigger values.
O LLV
i
■ You can see both the input signal level and the cur
rent trigger level setting on the display at the same
time. So you can adjust trigger level as necessary,
while viewing the signal. The trigger level setting is
marked by a single star (*}.
■ The input signal is ajso routed to the DSS-1 outputs
so you can monitor it by ear as well.
■?J Trigger level function procedure.
Operation
q : Confirm that the SA M P LE mode is selected and
that you have completed the INITIAL opera
tions {detailed in the previous section starting
on page 61).
Operation of DSS-1
♦ SA M P LE key LED is illuminated.
SAM P Lfc
\\ i
On
Press number 3 in the 10-key pad.
j
3
Press
# Selects the trigger level function. The display show
the current trigger level value.
Current numeric value of trigger level.
Shows numeric value of trigger level.
F 3
iKlüüLR LLULL=ytJU
Shows where the trigger level is in relation
to bar graph indication of input signal level.
7Ô