Korg Electronic Keyboard - Page 124

Program mode: HD-1
114
Note Map Table [+0000…+0064]
Assigns the “Table (Note Map Table)” (Program 7–3b)
function.
+0000: Custom
+0001…+0064: Global Tables 1…64
For more information, see “Table (Note Map Table)” on
page 106.
Note Map Transpose [–0012…+0012]
Assigns the ”Transpose (Note Map Transpose)”
(Program 7-3b) function.
For more information, see “Transpose (Note Map
Transpose)” on page 106.
Note Map Chord Track [+0000, +0001]
Assigns the “Chord Track (Note Map Chord Track)”
(Program 7–3b) function.
+0000: Off
+0001: On
For more information, see “Chord Track (Note Map
Chord Track)” on page 107.
Note Map Kbd Track [+0000, +0001]
Assigns the “Keyboard Track (Note Map Kbd Track)”
(Program 7–3b) function.
+0000: Off
+0001: On
For more information, see “Keyboard Track (C2 Ref)
(Note Map Kbd Track)” on page 107.
Group: Trigger
Quantize Trigger [+0000, +0001]
Assigns the “Quantize Trigger” (Program 7–4b)
function.
+0000: Off
+0001: On
For more information, see “Quantize Trigger” on
page 108.
Update On Release [+0000, +0001]
Assigns the “Update On Release” (Program 7–4b)
function.
+0000: Off
+0001: On
For more information, see “Update On Release” on
page 108.
Delay Start [+0000…+0025]
Assigns the “Delay Start” (Program 7–4b) function.
+0000: Off
+0001: Fixed
+0002…+0025: 3…4x 
For more information, see “Delay Start” on page 108.
Delay Start ms [+0000…+5000]
Assigns the “Delay Start Fixed” (Program 7–4b)
function.
See “Delay Start Fixed” ☞p.108
Note Trigger [+0000…+0003]
Assigns the “Note Trigger” (Program 7–4b) function.
+0000: Any
+0001: AKR
+0002: 1st
+0003: Dyn
For more information, see “Note Trigger” on page 109.
Note Latch [+0000, +0001]
Assigns the “Note Latch” (Program 7–4b) function.
+0000: Off
+0001: On
For more information, see “Note Latch” on page 109.
Env1 Trigger [+0000…+0003]
Env2 Trigger [+0000…+0003]
Env3 Trigger [+0000…+0003]
Assigns the Envelope “Trigger” (Program 7–4b)
functions.
+0000: Any
+0001: AKR
+0002: 1st
+0003: Dyn
For more information, see “Envelope Trigger” on
page 109.
Env1 Latch Mode [+0000…+0004]
Env2 Latch Mode [+0000…+0004]
Env3 Latch Mode [+0000…+0004]
Assigns the “Latch” (Program 7–4b) function.
+0000: Off
+0001: Sus1
+0002: Rel1
+0003: Sus2
+0004: Rel2
For more information, see “Envelope Latch” on
page 109.
Group: ZoneThru Inside Zone [+0000, +0001]
Assigns the “Thru In Zone” (Program 7–1a) function.
+0000: Off
+0001: On
For more information, see “Thru In Zone” on page 99.
Thru Outside Zone [+0000, +0001]
Assigns the “Thru Out Zone” (Program 7–1a) function.
+0000: Off
+0001: On
For more information, see “Thru Out Zone” on
page 99.