Combination mode
402
Combination P9: Master/Total Effect
Here you can make settings for the master effects and
total effects. For instance, you can:
• Route a sound to an master effects and total effects
• Make detailed settings for master effects and total
effects
For more information, please see “Effect Guide” on
page 727.
9–1: Routing
Here you can specify the type of master effects and
total effects, and turn them on/off.
The master effects are sent to the L/R bus. The total
effects are inserted into the L/R bus.
9–1a: MFX1, 2
MFX1
MFX1 [000…185]
MFX1 On/Off [Off, On]
Return 1 [000…127]
MFX2
MFX2 [000…185]
MFX2 On/Off [Off, On]
Return 2 [000…127]
Chain
Chain On/Off [Off, On]
Chain Direction [MFX1→MFX2, MFX2→MFX1]
Chain Level [000…127]
These parameters are the same as in Program mode.
For more information, please see “9–1a: MFX1, 2” on
page 134.
9–1b: TFX1, 2
TFX1
TFX1 [000…185]
TFX1 On/Off [Off, On]
TFX2
TFX2 [000…185]
TFX2 On/Off [Off, On]
These parameters are the same as in Program mode.
For more information, please see “9–1b: TFX1, 2” on
page 135.
9–1PMC8–5b
9–1a
1–1a
9–1b
9–1c
To Next Page
Loading...
