Program P4: OSC Pitch 4–5: Pitch EG/Mod
183
Intensity Mod AMS [List of AMS Sources]
You can modulate AMS 1’s Intensity from another
AMS source. This selects that source.
Intensity [+/-48.00 semitones]
This controls the depth and direction of the Intensity
Mod AMS, in semitones. The result is summed with
the main AMS 1 Intensity to produce the final pitch
modulation amount.
AMS 2 [List of AMS Sources]
This selects a second modulation source for controlling
the pitch of Oscillator 1 and the Sub Oscillator. For a
list of AMS sources, see “AMS (Alternate Modulation
Source) List” on page 967.
Intensity [+/-48.00 semitones]
This controls the depth and direction of the AMS 2
pitch modulation, in semitones.
Intensity Mod AMS [List of AMS Sources]
You can modulate AMS 2’s Intensity from another
AMS source. This selects that source.
Intensity [+/-48.00 semitones]
This controls the depth and direction of the Intensity
Mod AMS, in semitones. The result is summed with
the main AMS 2 Intensity to produce the final pitch
modulation amount.
4–5d: OSC 2 Pitch Modulation
Oscillator 2 has the same Pitch Modulation parameters
as described under “4–5c: OSC 1 & Sub OSC Pitch
Modulation,” above.
▼ 4–5: Page Menu Commands
The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see “ENTER + 0-9: shortcuts for menu
commands” on page 138.
• 0: Write Program. For more information, see “Write
Program” on page 138.
• 1: Exclusive Solo. For more information, see
“Exclusive Solo” on page 138.
To Next Page
Loading...
