STR-1 Tone Adjust 9-9: String Track
279
Excitation Filter
• Excitation Filter Type
• Excitation Filter Frequency
• Excitation Filter Resonance
String
• Excitation Position
• Harmonic Position
• Harmonic Pressure AMS1 Intensity
• Decay
• Nonlinearity
• Damping
• Dispersion
String Pitch
• String Tune (–1200...+1200, relative)
• String Transpose (–12...+12, relative)
• String Pitch Slope
• String Pitch LFO AMS Intensity
Pickups
• Pickup 1 Position
• Pickup 2 Position
Feedback
• Feedback Level AMS Intensity
• Feedback Distance AMS Intensity
• Feedback Orientation AMS Intensity
Mixer
• String Level
• PCM Oscillator Level
• Noise Level
• Pickup 1 Level
• Pickup 2 Level
Filter A
In addition to the standard Tone Adjust filter
parameters, the STR-1 adds the following:
• Filter A Type
• Filter A Cutoff
• Filter A Resonance
• Filter A EG Intensity
• Filter A LFO Intensity
Filter B
Filter B has the same Tone Adjust parameters as Filter
A, above.
Amp
• Amp AMS 1 Intensity
• Amp AMS 2 Intensity
EGs
In addition to supporting the standard Tone Adjust EG
parameters, the STR-1 adds the following separate
controls for both EG3 and EG4:
• Attack time (relative)
• Decay & Slope time (relative)
• Sustain level (relative)
• Release time (relative)
LFOs
In addition to supporting the standard Tone Adjust
LFO parameters, the STR-1 adds the following
separate controls:
• LFO 1, 2, 3, and 4 Waveform
• LFO 1, 2, 3, and 4 Shape
• LFO 3 Speed (relative)
• LFO 3 Fade (relative)
• LFO 3 Delay (relative)
• LFO 3 Stop
• LFO 4 Speed (relative)
• LFO 4 Fade (relative)
• LFO 4 Delay (relative)
• LFO 4 Stop
To Next Page
