Korg KR-55 PRO - Playing Audio Files and Recording Your Performance (Player Mode)

KR-55 Pro Owner's Manual
16
Playing audio les and recording
your performance (Player mode)
In Player mode, you can play WAV format (44.1 kHz/16-bit,
stereo) audio les from the SD card.
You can also record your performance on the recorder along
with the audio le that is playing back.
Playing audio les stored on an SD card
Here’s how you can copy audio les from your computer to
an SD card and play back those les on the KR-55 Pro.
1
5
6
6
7
2,5
3
2
4,8,9
Preparing audio les
1. Format an SD card on the KR-55 Pro.
See page 7 “Formaing (initializing) an SD card”
2. Power-o the KR-55 Pro, and remove the SD card.
3. Insert the SD card into your computer, and copy an
audio le from your computer into one of the [M1]–[M8]
locations in the PLAYER folder of the SD card.
See page 24 “Folder and le structure”
4. When you’ve nished copying the audio les, remove
the SD card from your computer and insert it into the
KR-55 Pro.
5. Power-on the KR-55 Pro.
Playing back
1. Take the steps described in “Preparing audio files” on
page 16.
2. Press the [PLAYER] buon to enter Player mode.
The [SD Card] buon lights.
The display shows the number of the audio les stored
on the SD card. The rst item of data on the SD card is
selected. The audio les in the PLAYER folder of the SD
card are shown by the KR-55 Pro in alphabetical order of
their le name.
3. Use the [M1]–[M8] buons to select the folder on the SD
card that contains the song you want to play.
The buon corresponding to the selected folder blinks.
See page 24 "Folder and file structure"
4. Press the [ ] buon to play the le.
When the le has nished playing, the next le plays.
When all les in the SD card have played, playback stops.
Tip: This is because with the default seings, Loop/
Auto is on, and the operating mode is LP:C1. You can
change this mode (see page 22 “Loop/auto-consecutive
playback function”).
5. You can use the [F1] or [F2] buons to select an audio le
to play.
6. Use the RHYTHM/PLAY knob to adjust the playback
volume of the audio le, and use the VOLUME knob to
adjust the overall volume.
7. During playback, you can use the VALUE dial to change
the playback speed.
You can adjust the speed in the range of ±25%.
The value will be shown for about one second, after which
the audio le number will be shown.
8. During playback, you can press the [ ] buon to
pause.
If you press the [VAR] buon, playback stops and you
return to the beginning.
9. Press the [ ] buon once again to start playback
from the paused location.
Tip: In Player mode, you can use the playlist function to
play only the les you want in a specic order (see page 22
“Playlist function”).