Push [COMBI] switch.
Check the sound after select BANK I-A ,I-B and I-C
. LCD color check
Push the switch in order of [PROG],[BANK I-A], [0], and [ENTER].
Check that abnormality is not fond the coler of LCD while turning the Rotary Encoder.
Push the switch in order of [I-D],[0], and [ENTER].
Check that abnormality is not fond the coler of LCD while turning the Rotary Encoder.
5. Start TEST MODE
Please push the switch of [MIXER KNOBS], [RESET CONTROLS], [ENTER], and [5] at the
same time.
LCD is displayed as shown in a right
figure.
6. System Version Check
Check that the displayed version is
latest.
“Version”,”OMAP”,”PSoC”,”Keybed”
7. Internal inspection check
Check the following inspection is OK
“MIDI”,”Battery”, “USB”, “Keybed”
8. Memory size
Confirm the size of implemented memory which is displayed on the side of “Memory”
Model Memory size
KRONOS 2 GByte
KRONOS X 3.25 GByte
(The above table added from the KRONOS(K4-) & KRONOS-X.)
9. The number of KEY
Check the number of KEY on the display.
10. Date and Time
Confirm that display time and date is now.
Confirm the size of SSD1 which is displayed on the side of “SSD1”.
(SDD1 &table added from the KRONOS(K4-) & KRONOS-X.)
To Next Page
Loading...
