APPENDIX
PSoC System loading
Do the loading of Psoc system when you exchange PANEL PC BOARD(KLM-3003 or KLM-3004)
(When IC SY8C21323-24PVXIT is exchanged, the loading is similarly done.)
When the first turning on power after it exchanges it, it is automatically loaded.
(note) Lording can be started if set power on with pushing [ENTER] and [<<REW]
Display start up and “Updating the panel scan system...” is displayed in the upper left side of LCD.
“Completed!” is displayed if loading succeeds.
If loading is failed, “Cannot update it.”
Set power off after confirm this message.
To Next Page
Loading...
