note) KDP2:For future use
Please do not select it.
Confirm that “OK” is displayed under “MAX” of “FootSwitch” momentarily.
It advances to the following inspection at the same time.
18. Keyboard check
18-1. Velocity check
Hit the key medium touch from right edge of key to leftedge of key.
When hard touch or soft touch is detected, the error is displayed.
Confirm a mechanical, abnormal noise is not generated while inspecting it.
It advances to the following inspection after left edge key check ends.
(note) How to hit or play keyboard .
Push right edge key and keep pushing it.
Keep pushing right edge key and push 2nd key from the right edge.
Keep pushing 2nd key from the right and release right edge key.
Keep pushing 2nd key from the right and push 3rd key from the right.
In the same way, push the 4th key from the right .
In the same way, check until left edge key sequentially
(Note) Do the setting according to the description of 18-1b) when versions are since
V1.5.1 and 73/88 keys. (18-1b is not displayed in the condition excluding this. )
18-1b) Keyboard select
Normal button and KDP1 button are displayed on the LCD screen as shown in the
photograph below.
The button that has been selected greens.
( If the new version has been added KDP2)
Select the button that suits the keyboard.
(note) How to distinguish type of keyboard
KDP1: A blue label is pasted to the position of the photograph on the next page.
KDP2: For the future use.
To Next Page
Loading...
