Listening to the demo songs
En-20
Listening to the demo songs
This procedure will load program and combination data
and demo song data into the KROSS. This means that
any data you’ve edited or newly created will be
overwritten and lost. If you want to keep this data, save
it on an SD card (commercially available) before you
continue.
1. In Global/Media mode, select the page that you want
to load
Press the GLOBAL/MEDIA button to enter Global
mode. Access the GLOBAL > BASIC page. (If
something other than the BASIC page is shown, press the
EXIT button several times.)
2. Load the demo songs and preload programs
Press the FUNCTION button. Use the (PAGE+) and
(PAGE-) button to select “Load Preload/Demo Data.”
Press the OK (MENU) button.
In the dialog box, set the Kind field to All (Preload PCG
and Demo Songs).
Press the OK (MENU) button. A confirmation message
will appear; press the OK (MENU) button once again.
The data will be loaded.
Never turn off the power while data is being loaded.
3. In Sequencer mode, select the playback page
Press the SEQ button to enter Sequencer mode.
Access the SEQ > MAIN page. (If something else is
shown, press the EXIT button several times.)
4. Select a demo song
Use Song Select to select a demo song. Use the cursor
buttons to select a parameter, and use the
VALUE dial to make your selection.
5. Start and stop playback
Press the START/STOP ( ) button to start
playback.
Playback will stop automatically when the song ends. If
you want to stop during the song, press the START/STOP
( ) button once again.
The demo songs you loaded will disappear when you
turn off the power, so you’ll need to reload them if
necessary.
Restoring the factory settings
Here’s how to restore the KROSS to the factory settings.
As described in steps 1 and 2 of “Listening to the demo
songs,” choose All Preload PCG in the Kind field of the
dialog box, and load the data.
Specifications (general)
System:
EDS-i (Enhanced Definition Synthesis - integrated)
Keyboard section:
KROSS-61: 61 keys (velocity sensitive; aftertouch not supported)
KROSS-88: NH (natural weighted hammer action)
keyboard (velocity sensitive; aftertouch not supported)
Maximum polyphony: 80 voices (80 oscillators)
Preset PCM memory:
Approximately 112 MB (calculated as 48 kHz / 16-bit linear
PCM data equivalent)
Sounds:
384 combinations (256 preload)
905 programs (512 preload / 265 preset)
Favorites: 64 (16 favorites × 4 banks)
Drum Kit: 57 Drum Kits (32 preload / 9 preset)
Effects: 134 types, 5 insert effects, 2 master effects
Production Tools:
Dual polyphonic arpeggiator, step sequencer, Drum Track
Recorder:
16-track MIDI sequencer,
Audio recorder (audio format: PCM audio format 48 kHz /
16-bit)
Control inputs/outputs:
DAMPER (half-damper supported), ASSIGNABLE
SWITCH, ASSIGNABLE PEDAL
MIDI IN, MIDI OUT, USB (TYPE B) USB-MIDI interface
Audio output:
AUDIO OUTPUT L/MONO, R: 1/4" phone jacks
(TS unbalanced)
Headphone output: 1/8" stereo mini phone jack
Audio input:
LINE IN: 1/8" stereo mini phone jack
MIC IN: 1/4" phone jack (TS unbalanced)
Phantom power and plug-in power are not supported
Power supply:
AC adapter power supply jack (DC 9V, )
AA alkaline batteries × 6, or nickel-metal hydride batteries × 6
Battery life:
AA alkaline batteries × 6: Approximately 4 hours
AA nickel-metal hydride batteries (1900 mAh) × 6:
Approximately 5 hours
* Battery life will vary depending on the batteries used and on
the conditions of use.
Usable SD cards:
SD memory cards up to 2 GB
SDHC memory cards up to 32 GB
(SDXC memory cards are not supported)
Dimensions (width × depth × height):
KROSS-61: 942 × 281 × 91 mm / 37.09" × 11.06" × 3.58"
KROSS-88: 1,448 × 383 × 135 mm / 57.01" × 15.08" × 5.31"
Weight:
KROSS-61: 4.3 kg/9.48 lbs
KROSS-88: 12.4 kg/27.34 lbs
Power consumption: 5 W
Included items:
AC adapter, KROSS Quick Start Guide (this document)
Options:
XVP-10: Expression/volume pedal
EXP-2: Foot controller
DS-1H: Damper pedal
PS-1, PS-3: Pedal switches
* Specifications and appearance of this product are subject to
change without notice for improvement.
To Next Page
Loading...
