KORG PA-80 Demonstration and Sales Guide
8
Editing, Creating, and Saving USER STYLES
It is also possible to edit the STYLES and re-save them to a USER STYLE location. New STYLES can be
created and saved in the same manner. This process is a bit more in-depth than can be covered here.
However, lets do a quick example of editing an existing style.
Let’s begin with a fairly simple STYLE
1. Select SOFT BEAT from the 8/16 BEAT 1 bank; Variation 1
2. Press the RECORD button, and select CURRENT STYLE by pressing the DRUM-PERC/DRUM
edit key.
3. At the bottom left of the DISPLAY, press the TRK SELECT button. You are now looking at a list
of all the Accompaniment Parts.
4. Using the BASS/PERC edit key, select the PERCUSSION track.
5. Press the Big, Red START/STOP button. The PA-80 will perform a one bar countdown and
then the STYLE will play. This Pattern is two bars long and will loop around. From here, you
can add to the STYLE.
6. Rhythmically, play “B” in the lowest octave (Triangle Sound) a few times. You will hear the
new triangle part as the pattern continues to loop.
7. Stop the STYLE by pressing the Big, Red START/STOP button.
8. Press the WRITE DISK IN USE button. There are three USER STYLE banks. Each bank
contains 16 locations
9. Using the procedure described in SAVING PROGRAMS, you can re-name your new STYLE and
select a USER STYLE LOCATION to save to.
10. To SAVE, press the ENTER/YES button twice
11. To NOT SAVE, use the MIC/ACC1 edit key to select ABORT, and press the ENTER/YES button.
Using this same procedure, you can select different tracks and edit different parts. By selecting NEW
STYLE at Step 2, the PA-80 will present an empty STYLE, where you can record all the parts yourself and
create an entirely new pattern.
To Next Page
Loading...
Need help?
General
