Korg Pa50 User Manual

11
Start up
Damper Pedal
3. On the Pa50, select the MIDI Setup that best fit your
controllers type (see “Page 4 - MIDI Setup” on
page 126).
DAMPER PEDAL
Connect a Damper (Sustain) pedal to the DAMPER connec-
tor on the back panel. Use a KORG PS1, PS2 or DS1H foot-
switch pedal, or a compatible one. To switch the Damper
polarity, see “Damper Pol. (Damper Polarity)” on page 126
DEMO
Listen to the built-in Demo Songs to appreciate the power of
the Pa50. There are 16 Demo Songs to choose from.
1. Press the STYLE PLAY and SONG PLAY buttons
together. Their LEDs start blinking.
At this point, if you don’t press any other button, all the
Demo Songs will be played back.
2. Choose a page using the PAGE buttons. There are two
different pages in the Demo mode.
3. Select a Demo Song by pressing the corresponding
VOLUME/VALUE button around the display. The
Demo will automatically start.
4. Stop the Demo by pressing START/STOP.
5. Exit the Demo mode by pressing one of the MODE but-
tons.
THE MUSIC STAND
A music stand comes standard with your Pa50. Fit it into the
two dedicated holes in the back panel.

Korg Pa50 Specifications

General

Type	Arranger Keyboard
Polyphony	62 voices
User Styles	48
MIDI	In, Out, Thru
Keyboard	61 keys
Timbres	16
ROM	32 MB
Performances	160
Effects	4 stereo digital multi-effect systems
Sequencer	16-track
Song Play	Yes
Display	Backlit LCD
Outputs	L/Mono, R, headphones
Inputs	Damper Pedal, Assignable Pedal/Switch
Floppy Disk	3.5"
Storage	Internal and floppy disk
Connections	Sustain pedal, assignable pedal
Amplification	2 x 15 Watts
Speakers	2 x 10 cm
Sound Engine	HI (Hyper Integrated) Synthesis System