Korg Pa5X - Page 224

214| PlayingtheSongs
Programming the switches for the
special tracks
Programming an assignable switch
You can assign the Melody/Voice Remover and/or Drum&Bass Mode functions
to an assignable switch.
1 Go to the Home > Menu > Switches page. As an alternative, keep the SHIFT
button pressed, and press the ASSIGNABLE SWITCH you want to program.
2 Assign the Melody/Voice Remover function to one of the Switch parameters.
3 If you want this assignable switch to remain programmed in the same way,
even if you select a dierent Keyboard Set or SongBook Entry, lock this page.
4 If you want this as the setup at startup, keep the MY SETTING button pressed
for about one second, and touch OK to conrm saving the My Setting Keyboard
Set.