Korg Pa5X - Page 225

Thespecialtracks(Melody,Drum&Bass) |215
Programming a footswitch
You can assign the Melody/Voice Remover and/or Drum&Bass Mode functions
to a footswitch.
1 Go to the Settings > Menu > Controllers > Foot page.
2 Assign the Melody/Voice Remover function to the Pedal/Footswitch param-
eters corresponding to the footswitch connected to the instrument.
The changes will be automatically saved to the global settings.
Using the switch or footswitch to mute the melody or
singer’s voice
1 While an Song is playing, press the programmed assignable switch or foot-
switch to remove the melody or singer’s voice.
2 Press the same switch or footswitch again to let the melody or singer’s voice
reappear.