334| DigitalDrawbars
Turning the switches on/o
To enable or disable the sound parameters, or to trigger the controls, do as fol-
lows.
> Use the CONTROL buttons on the control panel.
> Use the soft buttons in the display.
Please note that Vibrato/Chorus, Overdrive, Brake and Rotary Slow/Fast con-
trols will be only working if the following Insert FXs are recalled and enabled for
the Digital Drawbars Sound: Organ Vibrato/Chorus, CX-3 Amp, one of the Rotary
Speakers.
▪ Percussion
Percussion adds a pronounced percussive sound to the attack segment of the
organ sound. You can turn it on or o.
▪ Harmonic
You can change the harmonic content to the percussive attack. When the indica-
tor is on, the second harmonic is selected. When it is o, the third one is selected.