Korg Pa5X - Page 358

348| MicrophoneInput
Turning on/o the microphone channel
1 Press the MAIN button in the CONTROL section.
2 Check in the strip display the functions assigned to the buttons. If they are
not shown, press the VIEW button in the CONTROL section to see them.
3 Use BUTTON #1 (Mic On/O) to turn the microphone channel on or o.
Please note that, for safety reasons, the input is always switched o when turning
the instrument on.
As an alternative, use the Mic On/O command you can nd in the Home >
Control pane (with the Main control mode selected).
Routing the microphone to one of the audio outputs
By default, the microphone is sent to the main Left and Right audio outputs. You
can change the output routing and send it to any other output pair.
> Go to the Settings > Menu > Audio/Video > Audio In page.
> Set the Microphone In > Audio Out parameter to the desired audio output.
Audio Out Meaning
Left+Right MainLEFTandRIGHToutputs
Out1+2 Separatesub-outputs1-2
Out3+4 Separatesub-outputs3-4