Connectingamicrophone |349
Powering a condenser microphone
Condenser microphones require powering, supplied as a +48V phantom power
current on the XLR MIC input.
▪ Turn on the phantom power
1 Go to the Settings > Menu > Audio/Video > Audio In page, and select the
+48V Phantom Power checkbox.
2 If it is o, turn on the Mic channel.
3 Sing into the microphone to check if the microphone is powered and working.
▪ Turn o the phantom power
When disconnecting a microphone from the XLR jack, the phantom power is au-
tomatically turned o. Phantom power is also automatically turned o each time
you turn the Pa5X o.
As an alternative, you can go to the Settings > Menu > Audio/Video > Audio In
page, and deselect the +48V Phantom Power checkbox.
To Next Page
Loading...
