Korg Pa5X - Page 77

CustomizingtheKeyboardSets |67
Changing the local split point
You can choose a dierent point where the keyboard divides into an Upper and a
Lower part. This is called the split point.
▪ Change the local split point from the control panel
1 While in the Home > Main or Keys page, touch the Split icon to open the Split
dialog.
SPLIT button status Global switch
2 Touch the keyboard diagram in the display. When the Press a key message
appears, play the lowest note of the Upper (right) part on the keyboard.
As an alternative, touch the Set Point parameter to select it, and use the DIAL or
UP/DOWN controls to select the new split point.
When you change the split point, the Global switch is automatically deselected.
The split point is now local (see ‘Global’ and ‘local’ split point on page 69).