Korg PS60 Easy Start Guide

En-11
EnglishFrançaisDeutschEspañol
Changing the sound for Split settings
1 Press the LOWER or UPPER button to select the region whose sound you want to change.
When you press the LOWER or UPPER button, the ON buttons will light to indicate the on/off status of
each timbre for the region you selected.
2 Use the timbre ON buttons and the variation  buttons to switch sounds.
Setting the split point
1 Hold down the LOWER button and press the UPPER button.
Both indicators will blink and the display will show a note number.
2 Press the key that you want to specify as the split point.
The split point will be the lowest note of the upper region.
3 Press the LOWER, UPPER or EXIT button to complete the
split point setting.
Cancelling the Split settings
• When using split settings, you can press the SUB OFF/RECALL button to cancel the split. (The LOWER
and UPPER button will go dark and the SUB OFF/RECALL button will light.) The entire keyboard will
play the sound settings (Single or Layer) that had been specified for the main timbre before you
specified the split settings.
Split settings such as the choice of timbres or split point are preserved while the SUB OFF/RECALL button
indicator remains lit. By pressing the lit SUB OFF/RECALL button, you can return to the split settings.
Tip: When you’re playing a performance with split settings, you can use this to temporarily cancel the split
and play just the sounds of the main timbres.
2
1
3
1
2
Split point

Korg PS60 Specifications

General

Type	Performance Synthesizer
Synthesis Type	Sample-based synthesis
Velocity Sensitivity	Yes
Aftertouch	No
Arpeggiator	Yes
Sequencer	No
MIDI	In, Out, Thru
Power Supply	DC 9V
Keyboard	61 keys
Sound Engine	EDS-i
Effects	2 Master effects
Controllers	Pitch bend, modulation wheel
Outputs	2 x 1/4" (L/R)
USB	Type B x 1
Sound Generator	EDS-i
Preset Programs	440 programs
Polyphony	120 voices (120 Oscillators)
Inputs	1 x 1/4" (damper)