Korg SDD-3000 PEDAL - External MIDI Device Usage

16
When using an external MIDI device
MIDI cable
Sequencer, MIDI data ler, etc.
To an electrical
outlet
AC adapter
Using MIDI, the SDD-3000 PEDAL can be controlled from a sequencer or can control external MIDI
devices. In addition, programs saved on a MIDI data ler or sequencer capable of sending/receiving
MIDI exclusive data can be loaded on the SDD-3000 PEDAL.
Note:
In order to exchange MIDI data with a connected external MIDI device, the SDD-3000 PEDAL
and the MIDI device must be connected with a MIDI cable, and their MIDI channels must be set
appropriately. (See page 24“Seing the MIDI channel” )