29
If you suspect a malfunction, please check the following points. If this does not resolve the problem,
please contact a nearby dealer.
Power won’t turn on
• Is the AC adapter connected to the rear panel DC9V jack?
• Is the AC adapter connected to an AC outlet?
• Could the AC outlet be faulty?
• Could the AC adapter be malfunctioning?
• Is the cable connected to the INPUT jack correctly?
No sound
• Is your instrument correctly connected to the SDD-3000 PEDAL’s INPUT jack?
• Could the cable be broken?
• Could the volume be turned down on the instrument that’s connected to the INPUT jack?
• With the NO DRY function enabled, is the Effect off (bypass)?
Effects aren’t heard
• Is the effect turned on?
• Is BALANCE assigned to the pedal that’s connected to the CONTROL PEDAL jack?
Something is wrong with the sound
• Check the effect settings.
Using the footswitches, buttons, or knobs does not change the
sound
• Could the effect be turned off?
• Could the Key Lock function be enabled?
Power turns off unexpectedly
• The SDD-3000 PEDAL is equipped with an auto power-off function that automatically turns off
the power (low-power consumption mode) when the unit hasn’t been used for 4 hours. If you
want to disable the Auto Power-Off function, please refer to “Auto power-off function” on page 24.
Troubleshooting
To Next Page
Loading...
