Kostal KSEM - Notes in this Manual

13
1
© 2020 KOSTAL Solar Electric GmbH
General information
1.4 Notes in this manual
Installation
Install a line circuit breaker into the mains cable
between the inverter and the feed meter to
secure it against overcurrent.
In countries in which a second PE connection
is prescribed, connect this at the marked place
on the housing.
Connecting AC-side
Connect the wires of the mains cable to the
AC terminal in accordance with the labelling.
For connection with a computer or with a
computer network. Connect several inverters
to a network for data retrieval.
DANGER
De-energise the device,
secure it against being
restarted and wait five
minutes so that the capaci-
tors can discharge.
Risk of death due to electrical
shock and discharge!
IMPORTANT NOTE
To connect the AC cables,
the inverter is equipped with
spring-loaded terminal strips.
INFO
For connection with a
computer, an Ethernet cable
of category 6 is to be used.
Fig. 3: Safety instructions in this manual
1
Reference icon within the instruction text
2
Warning
3
Information note
4
Other notes
Notes have been incorporated into the instruction text. A
dierentiation is made in this manual between warnings
and information notes. All notes are identified in the text
line with an icon.
2
3
4
5
1