Kostal KSEM - The KSEM with the PIKO 4.2-20; PIKO EPC

46
3
© 2020 KOSTAL Solar Electric GmbH
Installation
The KOSTAL Smart Energy Meter (KSEM) can be used in
conjunction with the PIKO 4.2-20 or PIKO EPC in the
following variants.
n
24-hour load / generation measurement
(measuring the current home consumption and
output power)
n
Multiple-inverter connection
(several KOSTAL solar inverters in the same home
network, only one KOSTAL Smart Energy Meter is
required)
Ch. 3.6
n
Dynamic active power control
n
Sending measurement data to the KOSTAL Solar
Portal
INFO
It is possible to use the KOSTAL
Smart Energy Meter in conjunction
with the PIKO 4.2-20 or PIKO EPC as
of inverter FW5.0.
3.5 The KSEM with the PIKO 4.2-20 / PIKO EPC
2
3
4
5
1