52
3
© 2020 KOSTAL Solar Electric GmbH
Installation
Setting up feed-in limitation
To set up a feed-in limitation (power limitation) at the grid
connection point for the public grid, this function has to
be set up in the KOSTAL Smart Energy Meter. More
information can be found in
Ch. 4.8
Do this by performing the following steps:
1. Call up online interface of KOSTAL Smart Energy
Meter
Ch. 4.3
2. Go to Inverter > “Power limitation”.
3. Enter feed-in capacity limit for entire system. Use the
calculator to easily set this to a particular percentage
(e.g. 70%).
4. Activate the power limitation.
H
The feed-in limitation at the grid connection point has
been set up for all inverters.
To Next Page
Loading...
