84
4
© 2020 KOSTAL Solar Electric GmbH
Operation and operating the device
Network settings
Changes to the IP settings can be undertaken here.
Parameter Explanation
Host name The host name is the device’s unique
designation in the network.
Any name can be chosen and may
contain upper-case letters, lower-case
letters, numbers and hyphens.
DHCP When DHCP is activated, the device
automatically obtains an IP address,
e.g. from a router. No further settings
are needed in this case.
If a static IP address is to be set,
DHCP must be deactivated and the
“Advanced settings” opened. A static
IP address, subnet mask, standard
gateway and DNS server can be
configured here.
If UPnP is activated, the device is
automatically detected by PCs in the
same network and displayed in the
network environment. This makes it
easier for the user to find the device in
the network if he or she doesn't know
the IP address.
INFO
Please note that improper settings
may result in the user interface no
longer being available.
To Next Page
Loading...
