88
4
© 2020 KOSTAL Solar Electric GmbH
Operation and operating the device
Parameter Explanation
Reset - reset device to
state in which it was
delivered
Clicking on “Reset” resets the device
to state in which it was delivered.
The default password then applies
again. To log in again, you will need
the password from the energy meter’s
type plate, which can be found on
a separate instruction leaflet in the
packaging.
Update device firmware This menu item can be used to load
new device firmware for the KOSTAL
Smart Energy Meter
Ch. 5.4.
System logs This menu item can be used to
download system log data as a text
file for certain time periods
Ch. 5.3.
To Next Page
Loading...
