Kramer KDS-7-MNGR

Kramer Electronics Ltd.
KDS-7-MNGR – Defining KDS-7-MNGR
4
Defining KDS-7-MNGR
Figure 1: KDS-7-MNGR 4K AVoIP Manager
#
Feature
Function
USB Type A Charging
Ports
Connect to a keyboard and mouse to control the units via UI using a
display connected to the unit via HDMI output port.
LCD Display
Use for device information and configuration.
Menu
Navigation
Button

Press to return to the previous menu.

Press to move up to the next configuration parameter.

Press to go to the next menu.

Press to move down to the next configuration parameter.
Enter
Press to accept changes.
LINK LED
See Understanding LED Functionality on page 7.
NET LED
ON LED
24V/5A DC Connector
Plug the 24V DC power adapter into the unit and connect it to an AC
wall outlet for power. (Optional, not required if the unit is powered via
PoE).
RESET Recessed Button
Press and hold for about 20 seconds, until all LEDs flash, to reset the
device to its factory default values.
LAN Port
Connect directly, or through a network switch, to your PC/ laptop to
control the unit via Web GUI/Telnet.
HDMI OUT Port
Connect to a display to control the unit directly.
1
2
3
4
5
6
7
8
9
10