Defining AV Routing Parameters
Set the KDS-7-MNGR AV routing parameters.
To set AV routing parameters, as needed:
1. In the Navigation pane, Select Main>AV Routing. The AV Routing page appears (see
Figure 9).
2. Next to Routing View, click Matrix (default) to view the system as a matrix (see
Figure 9) or click Icon to view each encoder/decoder as icons.
3. Click SAVE AS PRESET: to save this setting as a preset.
Figure 10: Saving a Preset
Enter the preset name and then click SAVE.
A/V routing is saved as a preset for KDS-7-MNGR. the Preset tab lists the presets.
Preset name is alphanumeric and can include hyphens ans under scores within the
name.
4. Under Encoder/Decoder Filters, enter the name of an encoder or decoder, to find a
specific device from the device list.
5. Click next to an encoder to watch a preview of the streaming.
Routing parameters are defined.
To Next Page
Loading...