5. In the same way add more presets to the list as needed.
Figure 31: Preset Sequence List
6. For each Preset you can:
▪ Click DETAILS to view the preset setup.
▪ Click EDIT to replace the preset with a different one or change the run time.
▪ Click DELETE to delete the preset from the list
7. Manage the preset sequence:
▪ Click START to run the preset sequence.
▪ Click STOP to stop the sequence.
▪ Click PAUSE to pause the preset sequence.
▪ Click RESUME to resume the preset sequence.
The preset sequence is configured.
Managing the Devices
Each encoder and decoder can be managed via the KDS-7-MNGR.
KDS-7-MNGR enables performing the following actions:
• Managing Encoder and Decoder Devices on page 33.
• Creating Groups on page 37.
• Creating Video Walls on page 39.
• Configuring KVM on page 42.
• Configuring Gateways on page 43.
To Next Page
Loading...