Kramer KDS-7-MNGR

Kramer Electronics Ltd.
KDS-7-MNGR – Using KDS-7-MNGR Embedded Web Pages
42
Configuring KVM
KVM configuration enables users to control multiple decoder screens with one set of keyboard
and mouse.
To configure KVM (to control 2 decoders, for example):
1. In the Navigation pane, Select Device Management>KVM/USB. The KVM/USB tab
appears.
Figure 45: Device Management – KVM/USB Tab
2. Click CREATE KVM. KVM Group Name definition area appears.
Figure 46: KVM/USB – Creating KVM Group Name
3. Enter the KVM group name (for example, KVM-1).
4. Set the number of rows and columns. For example, 1 row and 2 columns, indicating 2
displays side by side.
Figure 47: KVM/USB Page – setting the KVM Group.