Kramer Electronics Ltd.
KT-107, KT-107RB - Introduction
Safety Instructions (DC)
There are no operator serviceable parts inside the unit
Use only the Kramer Electronics power supply that is provided with the unit
Disconnect the power and unplug the unit from the wall before installing
Recycling Kramer Products
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce
the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected
and recycled. To comply with the WEEE Directive, Kramer Electronics has made
arrangements with the European Advanced Recycling Network (EARN) and will cover any
costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on
arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular
country go to our recycling pages at www.kramerav.com/support/recycling/.
Overview
Congratulations on purchasing your Kramer KT-107/KT-107RB Touch Panel.
Throughout this manual KT-107 refers to both KT-107 and KT-107RB, unless specified
otherwise.
KT-107RB Wi-Fi 5GHz frequency band range is restricted to up to 5.35GHz.
KT-107 is a 7-inch IPS multi-touch, powerful Touch Panel with 1280x800 resolution. The
elegantly designed portable Touch Panel can be deployed either on a table or on the wall.
KT-107 supports wired Power over Ethernet (PoE) and advanced Wi-Fi connectivity options.
To ensure easy installation with elegant wiring and secured mounting, the Touch Panel
comes with table and wall mounts, a USB cable and a power supply unit.
The KT-107 is an Android-based Touch Panel that is ideal for any 24/7 Kramer-supported
commercial AV or control application and features a user-friendly, fully customizable graphical
user interface configured by Kramer software.
The KT-107 provides exceptional quality, advanced and user-friendly operation, and high-level
security options.
To Next Page
Loading...
Need help?
General
